Enclosures

UE Enclosures is willing to partner with our customers to assist your engineering team in designing the enclosures for your application. Using over 25 years of manufacturing experience and implementing Lean Manufacturing practice, we can assist your engineering team in designing the best enclosure for your needs.

UE Enclosures manufactures custom enclosures to your specifications. Whether you have a completely original enclosure design or you would like an industry standard enclosure with a few modifications, we build to your needs.

How we do it

The UE Enclosures manufacturing facility was designed and built to manufacture custom enclosures. Unlike most mass-manufacturers of enclosures that treat any custom enclosures as “Specialty”, UE Enclosures expects customization for every enclosure we build. We effectively manufacture to a batch quantity of one.

Advantages of a UE Enclosure

  • Always built to your specifications
  • Faster delivery
  • Laser cut for burr free construction
  • Powder coat finish in the colour you want
  • Shipped ready for installation
  • Assistance with design
  • CSA/UL

Your choice of enclosure options and features

  • Standard industry accessories
  • Cut outs, custom holes
  • Glass or Plexiglas doors and windows
  • Custom cabinets
  • Paint colour choice
  • Louvers and vents
  • Tapped holes
  • Alternative materials
  • Lifting eyes
  • Mounting holes
  • Shelves

 

UE Enclosures can provide assistance to help you specify the exact enclosure for your application.

UE Enclosures manufactures custom enclosures that are Canadian Standards Association (CSA) approved.

Transformer Enclosures

UE Enclosures manufactures custom transformer enclosures that are CSA/UL compliant.

Transformer enclosures are manufactured to your requirements.

Your custom transformer enclosure can include:

  • TYPE, 1, 3, 3R, 3S, 12, 4, or Type 4X
  • Superseal flange on enclosure openings
  • Continuous hinge or two point hinged doors
  • Concealed hinges
  • Polyurethane gasket
  • Neoprene gasket
  • Seamless Foam in Place gasket
  • Weld nuts or collar studs for back panel
  • Single or multiple back panels
  • External mounting feet
  • Ground provision
  • Print pocket
  • Stainless steel external hardware
  • Body stiffeners
  • Floor stands
  • Fixed or removable lifting eyes
  • Fixed or removable center post for multi-door / multi-bay enclosures
  • Flanged doors and side openings
  • Left or right-side door hinges
  • End plates
  • Louvers
  • Flush mount panels
  • Slope roof
  • Gas Springs
  • Modular or solid construction
  • Zinc powder primer
  • Two tone colour
  • Fitters
  • Indoor enclosures
  • Outdoor enclosures
  • Removable structural base
  • Steel, Aluminum or Stainless Steel

Solar Enclosures

UE Enclosures manufactures custom solar enclosures that are CSA/UL compliant.

Solar enclosures are manufactured to your requirements.

Your custom solar enclosure can include:

  • TYPE, 1, 3, 3R, 3S, 12, 4, or Type 4X
  • Superseal flange on enclosure openings
  • Continuous hinge or two point hinged doors
  • Concealed hinges
  • Polyurethane gasket
  • Neoprene gasket
  • Seamless Foam in Place gasket
  • Weld nuts or collar studs for back panel
  • Single or multiple back panels
  • External mounting feet
  • Ground provision
  • Print pocket
  • Stainless steel external hardware
  • Body stiffeners
  • Floor stands
  • Fixed or removable lifting eyes
  • Fixed or removable center post for multi-door / multi-bay enclosures
  • Flanged doors and side openings
  • Left or right-side door hinges
  • End plates
  • Louvers
  • Flush mount panels
  • Slope roof
  • Gas Springs
  • Modular or solid construction
  • Zinc powder primer
  • Two tone colour
  • Fitters
  • Indoor enclosures
  • Outdoor enclosures
  • Removable structural base
  • Steel, Aluminum or Stainless Steel

Electrical Interface Enclosures

UE Enclosures manufactures custom electrical enclosures that are CSA/UL compliant. Electrical enclosures include cutouts to mount push buttons, pilot lights, meters, switches, HMI panels, flat screens, and gauges.

Operator interface enclosures provide protection against oil, water dust and dirt.

Your custom operator interface enclosure can include:

  • CSA TYPE, Type 1, 3, 3R, 3S, 12, 4, or Type 4X
  • Key-locking handle
  • Door stops to hold panel open
  • Print pocket
  • Grounding provision
  • Neoprene gasket
  • Polyurethane gasket
  • Seamless Foam in Place gasket
  • Removable back panel
  • Writing surface/desk
  • Weld nuts or collar studs for panel mounting
  • Flat or sloped control surface
  • Flushed or raised main door
  • Cover
  • Double or single walled doors
  • Swing sub panels
  • Pedestal base
  • Removable hinges
  • Aluminum
  • Stainless Steel

Electrical Enclosures

UE Enclosures manufactures electrical enclosures to your specifications. Whether you have a completely original enclosure design or you would like an industry standard enclosure with a few modifications, UE Enclosures builds to your needs. We specialize in building a wide range of electrical enclosures to meet your specifications.

Following options are available.

  • Print / document pocket
  • Folding programmer shelf
  • Door stop kit
  • Folding and fixed shelves
  • Drip shields
  • Hole seals
  • Window kits
  • Interlock defeater
  • Floor stands
  • Casters, locking and non-locking
  • Panel supports
  • Stabilizers
  • Adapter plates
  • Locks, latches, clip nut
  • Clamp assemblies
  • Channels
  • Map kits
  • Filters
  • Grills
  • Louvers
  • Best enclosure in terms of finish and appearance

Miscellaneous Enclosures

UE Enclosures manufactures a wide variety of enclosures that are CSA/UL compliant.

All enclosures are manufactured to your requirements.

Your custom enclosure can include:

  • TYPE, 1, 3, 3R, 12, 4, or Type 4X
  • Rolled lip on enclosure openings
  • Continuous hinge or two point hinged doors
  • Concealed hinges
  • Polyurethane gasket
  • Neoprene gasket
  • Seamless Foam in Place gasket
  • Weld nuts or collar studs for back panel
  • Single or multiple back panels
  • External mounting feet
  • Ground provision
  • Print pocket
  • Stainless steel external hardware
  • Body stiffeners
  • Floor stands
  • Fixed or removable lifting eyes
  • Fixed or removable center post for multi-door / multi-bay enclosures
  • Flanged doors and side openings
  • Left or right-side door hinges
  • End plates
  • Louvers
  • Flush mount panels
  • Slope roof
  • Gas Springs
  • Modular or solid construction
  • Zinc powder primer
  • Two tone colour
  • Fitters
  • Indoor enclosures
  • Outdoor enclosures
  • Removable structural base
  • Steel, Aluminum or Stainless Steel

CSA Types can be applied to all enclosures

UE Enclosures is a Canadian Standards Association (CSA) international listed manufacturer and our products have been deemed to be in compliance to Underwriters Laboratories (UL) Standard No. 50 covering Electrical boxes and Cabinets. UE Enclosures products are therefore authorized to bear the CSA/US “NRTL” marking indicator which identifies compliance to US standards.

We have been a CSA certified company since 1998. CSA is a non-profit organization serving business, industry, government and consumers in Canada and the global marketplace. Among many other activities, CSA develops standards that enhance public safety.

A Nationally Recognized Testing Laboratory, CSA is very familiar with U.S. requirements. CSA is formally recognized by Occupational Safety and Health Administration (OSHA) and the CSA-US Mark qualifies as an alternative to the Underwriters Laboratories (UL) Mark.

CSA, NEMA, UL and IP ratings are based on geographical regions and the ratings are based on similar application descriptions and expected performance. UE Enclosures is a manufacturer of product that meets or exceeds CSA and UL compliance requirements. We are certified to meet CSA Types 1, 2, 3, 3R, 4, 4X and 12 Designation. CSA inspectors do regular audits at our facility to ensure compliance with prescribed manufacturing methods.

TYPE 12 Enclosures

TYPE 12 electrical enclosures are used for electrical junction boxes, terminal wiring boxes, instrument housing, component enclosures, and communication equipment enclosures. TYPE 12 electrical enclosures are ideal for indoor protection of components exposed to dust, dirt, oil and water.

Your TYPE 12 electrical enclosure can include:

  • Gasket on lids and doors
  • Neoprene gaskets
  • Polyurethane gasket
  • Seamless Foam in Place gasket
  • Hinged or removable door
  • Continuous hinge
  • Removable hinge pin
  • External screw clamps
  • Quick release latch
  • Locking handle
  • Lift off cover
  • Cover screws thread into sealed wells
  • Chain holds on cover
  • Front, side or rear door placement
  • Mechanical interlock for multi-door enclosures
  • Weld nuts or collar studs for back panels
  • External mounting plates
  • Ground provisions
  • Print pocket
  • Door and body stiffeners
  • External mounting feet
  • Rolled lip on door and enclosure opening
  • Two door overlapping or center post design
  • External frame for wall recess
  • Lifting eyes
  • Free standing
  • Floor mounting feet
  • Steel
  • Stainless Steel
  • Aluminum
  • Powder coat finish

TYPE 1 Enclosures

UE Enclosures manufactures electrical boxes and cabinets that are CSA/US approved.

TYPE 1 electrical enclosures are used for instrument cases, junction boxes, service boxes, switch boxes, cutout boxes and pull boxes in commercial and general industrial applications not requiring oil-tight or dust tight specifications.

Your TYPE 1 electrical enclosure can include:

  • Flush covers for flush mount applications
  • Flat removable covers
  • Mounting holes on back of box
  • Pull handle with friction latch
  • Hinged or removable cover
  • Removable/replaceable covers
  • Grounding provision
  • Flush latch with screwdriver or coin operation
  • Weld nut or collar studs for back panel mounting
  • Single or multiple back panels
  • Removable hinge pins
  • Door and body stiffeners for large enclosures
  • External mounting feet
  • Steel
  • Stainless Steel
  • Aluminum
  • Powder coat finish

TYPE 3R Enclosures

Type 3R electrical enclosures provide protection in outdoor applications against rain, sleet and snow or indoors against dripping water. As a result, TYPE 3R enclosures are used as wiring boxes and junction boxes.

Your TYPE 3R electrical enclosure can include:

  • Drip shield top and smooth seamless sides and front
  • Hasp for padlocking
  • Slip on or hinged cover
  • Weld nuts or collar studs for mounting back panels
  • Single or multiple panels
  • External mounting plates
  • Ground provisions
  • Drip shield
  • Mounting feet
  • Stainless steel hinge pin
  • Gasket free design
  • Steel
  • Stainless Steel
  • Aluminum
  • Powder coat finish
  • Zinc powder primer

TYPE 4 Enclosures

TYPE 4 electrical enclosures are used for electrical junction boxes, terminal wiring boxes, electrical control enclosures, instrument housing, and communication equipment enclosures. TYPE 4 electrical enclosures are well suited for wet indoor or outdoor applications.

Your TYPE 4 electrical enclosure can include:

  • Continuously welded seams
  • Neoprene gasket
  • Seamless Foam in Place gasket
  • Polyurethane gasket
  • External mounting plates
  • Weld nuts or collar studs for back panel
  • Single or multiple back panels
  • Stainless steel screws and clamps
  • Grounding provision
  • Removable hinge pins
  • Cover screws thread into sealed wells
  • Print pocket
  • Plexiglas window
  • Rolled lip on door and enclosure opening
  • Door and body stiffeners
  • Lifting eyes
  • Hasp for padlocking
  • Steel
  • Stainless Steel
  • Aluminum
  • Powder coat finish
  • Zinc powder primer

TYPE 4X Enclosures

TYPE 4X electrical enclosures are well suited for wet indoor or outdoor applications and provide protection agents rain, snow, windblown dust, splashing water, undamaged by external formation of ice on the enclosure and is corrosion resistant.

TYPE 4X electrical enclosures are used for electrical junction boxes, terminal wiring boxes, electrical control enclosures, instrument housing, and communication equipment enclosures.

Your TYPE 4X electrical enclosure can include:

  • Continuously welded seams
  • Neoprene gasket
  • Seamless Foam in Place gasket
  • Polyurethane gasket
  • External mounting plates
  • Weld nuts or collar studs for back panel
  • Single or multiple back panels
  • Stainless steel screws and clamps
  • Grounding provision
  • Removable hinge pins
  • Cover screws thread into sealed wells
  • Print pocket
  • Plexiglas window
  • Rolled lip on door and enclosure opening
  • Door and body stiffeners
  • Lifting eyes
  • Hasp for padlocking
  • Steel
  • Stainless Steel
  • Aluminum
  • Powder coat finish
  • Zinc powder primer